Top 7 Press Fit Bottom Bracket Tool – Bike Shop Tools

As an Amazon Associate I earn from qualifying purchases.

1. Park Tool

#ad

Fits BB90, etc., Shimano, BB92, Park Tool BBT-90.3 Press Fit Bottom Bracket Bearing Tool Set

#ad
Park Tool #ad - Bushings are used in conjunction with a Park Tool Bearing Press to press the bearings into the bottom bracket shell. Bearing removal tool is used to drive bearings out of the bottom bracket shell. Installs and removes bearings and bearing units used in bb90, Shimano press fit, BB92, SRAM GXP press fit, Race Face press fit and other press fit bottom bracket systems using 24mm or 22mm spindles.
BrandPark Tool #ad
ManufacturerPark Tool #ad
Height11 Inches
Length2 Inches
Weight0.78 Pounds
Width2 Inches
Part NumberBBT-90.3
ModelBBT-90.3
WarrantyLimited Lifetime Warranty - see Parktool.com/warranty for details

2. Park Tool

#ad

PF30, etc., Park Tool BBT-30.4 Press Fit Bottom Bracket Bearing Tool Set, Compatible with BB30

#ad
Park Tool #ad - Bb30 bearing remover works from inside the shell to easily drive out bearings. Bushing set used in conjunction with cup press quickly and precisely presses BB30 and PF30 bearings into the bottom bracket shell. Extra length for wider fat bike bottom bracket shells. Installs and removes the bearings used in bearings used in BB30, 386EVO, PressFit 30 PF30, BBright and PF121 bottom bracket systems.
BrandPark Tool #ad
ManufacturerPark Tool #ad
Height1 Inches
Length1 Inches
Weight1.11 Pounds
Width1 Inches
Part NumberBBT-30.4
ModelQKBBT304
WarrantyLimited Lifetime Warranty - see Parktool.com/warranty for details

3. KENWAY

#ad

KENWAY Acekit Bike Headset BB Cup Press Bottom Bracket Install Tool

#ad
KENWAY #ad - Compatible with common 34-56 mm external, half-hidden headset, suitable for BB86/90/91/92 bottom bracket installation. Base pplate of tool with invaginated groove protect the headset plate from damage. Length of the bolt about 195mm 7. 7 inches, diameter of the base plate about 2 inches 50mm. Stable and labor-saving, the interlayer is the bearing ball layer, make sure the headset can be pressed in the fork stable and smooth. Material: harden and heated alloy steel base plate stainless steel threaded bolt.
BrandKENWAY #ad
ManufacturerAcekit #ad
Part NumberAcekit

4. Acekit

#ad

Acekit Bike Headset Cup and Bottom Bracket Press Installation Tool BB Install Tool for BB30 and BB90

#ad
Acekit #ad - The set of the tool special designed for bike headset and bottom bracket installation, make you job done easily and professional.

Kind remind: please use the grease when installing, this could do a lot helpful for your job and protect your headset or bottom bracket. The thread of the bolt is 5/8 inch 16mm diameter nominally 16mm, length of the bolt about 245mm 9. 6 inch, works with BB shells up to 135mm wide. Printed t handle antislip and dismountable, delivery powerful torque. Come with two bb drifts, diameter of the drift are 50mmoutside and 28mminnerside, fit most of the headset and BB30 BB90 series bottom bracket.
BrandAcekit #ad
ManufacturerAcekit #ad
Part Number190319SPBH01

5. BIKE HAND

#ad

BIKEHAND Bike Bicycle Headset Cups & Bottom Bracket Bearing Press Fit BB Install Tool

#ad
BIKE HAND #ad - Weight: 1kg or 2. 2 lbs. Easy to use: 2 center fitting pieces need to be installed upside down to fit BB, please watch our video in the listing for more details. Prevent damaging: press in evenly top and bottom to avoid a damage on the bearings or cups. Heavy duty: material: heavy duty steel. 2 in 1: this tool is good for installing all bike headset cups & all press fit bike bottom brackets. Order now, worry free! we're so confident about our product quality that we can provide a life time warranty! Made in Taiwan.
BrandBIKE HAND #ad
ManufacturerBIKE HAND #ad
Height2.36 Inches
Length18.11 Inches
Weight3.75 Pounds
Width3.15 Inches
Part NumberYC-107F

6. Park Tool

#ad

Park Tool HHP-3 Home Mechanic Bearing Cup Press

#ad
Park Tool #ad - The hhp-3 is designed to install all sizes of head cups 1" to 1-1/2" and one-piece bottom bracket cups. Will also press bb30 and bb90 BB86, or BB92 system cups. The thread of the hhp-3 is 5/8" 16mm diameter nominally 16mm and will work to press the BMX bottom brackets.
BrandPark Tool #ad
ManufacturerPark #ad
Height1.5 Inches
Length18.75 Inches
Weight3.5 Pounds
Width3 Inches
Part NumberQKHHP3
Model140007

7. Lixada

#ad

Lixada Bicycle Bottom Bracket Install and Removal Tool Kit Bike Bottom Bracket Remover for BB86/BB30/BB91/BB92/PF30

#ad
Lixada #ad - Constructed of aluminum alloy and stainless steel, very durable. Suitable for removing bb86/bb30/bb91/bb92/pF30 press-fit type bottom brackets, and installing most hollow threaded bottom bracket bearings. Suitable bearings: 6805 25x37x7, 6806 30x42x7.
BrandLixada #ad
ManufacturerLixada #ad
Part NumberWIU1326845406487KL