Top 10 XS Scuba LED – Diving Safety Lights

As an Amazon Associate I earn from qualifying purchases.

1. XS Scuba

#ad

XS Scuba LED Glowstick Lights-White

#adXS Scuba #ad - Locate your Buddy Underwater Easier at Night. Xs scuba leD Glowstick. Stop buying and throwing Away One-Time Use Chemical Sticks. Fourteen tubes of Light Illuminate the Entire Glowstick. Great for night diver, cave Diver, Wreak Diver or Dive in Low Light Conditions.

Brand	XS Scuba #ad
Manufacturer	XS Scuba #ad
Height	0.3 Inches
Length	3.7 Inches
Weight	0.2 Pounds
Width	7.1 Inches
Part Number	GS100-WH

2. XS Scuba

#ad

XS Scuba LT100 300 Lumens Dive Light

#adXS Scuba #ad - Depth rated to 330 ft / 100 m. Magnetic switch offers variable light output. Battery duration – 24 hours to 1 hour. Brightness - 10 lumens to 300 lumens. Beam distance – 800 ft / 240 m.

Brand	XS Scuba #ad
Manufacturer	XS Scuba #ad
Height	5.5 Inches
Length	2.2 Inches
Weight	0.45 Pounds
Width	2.9 Inches
Part Number	LT100

3. XS Scuba

#ad

XS Scuba LT360 1000 Lumens Wide Angle Dive Light

#adXS Scuba #ad - High is 1000 lumens, miD is 500 lumens. Battery duration – 2. 3h @ 1000 lumen / 4. 5 h @ 500 lumen. Fully charged in 5 hours with Micro USB DC1A/5. 0v. Multi-position button switch HIGH-MID-OFF. Uses 1 x 26650 5000mah 4. 2v li-ion rechargeable battery.

Brand	XS Scuba #ad
Manufacturer	XS Scuba #ad
Height	7.8 Inches
Length	2.3 Inches
Weight	0.95 Pounds
Width	3.8 Inches
Part Number	LT360

4. XS Scuba

#ad

XS Scuba Shot Diving Weight Yellow 3 LB

#adXS Scuba #ad - No scrap Lead Used. Larger #4 shot with Less Surface Area. Hardened with Antimony. Quick draining and Drying. Heavy-duty Nylon Mesh Bags.

Brand	XS Scuba #ad
Manufacturer	XS Scuba #ad
Weight	3 Pounds
Part Number	WC03-13

5. XS Scuba

#ad

Xs Scuba Tl112 Bc Wash Out Hose

#adXS Scuba #ad - Inflate and allow to dry before storing. Wash the inside of your BC often. Fill about half way with fresh water to fully rinse inside. Give the bc a good shaking. Invert the bc, drain the water and debris out by depressing the oral inflator button. Fits inflators with standard male QD nipple.

Brand	XS Scuba #ad
Manufacturer	XS Scuba #ad
Height	0.6 Inches
Length	5 Inches
Width	6.3 Inches
Part Number	TL112
Model	TL112

6. XS Scuba

#ad

XS Scuba Kp04 Neoprene Knife Holder

#adXS Scuba #ad - Xs scuba neoprene knife wrap knife IS NOT INCLUDED. Adds soft cushioned Layer between Leg and Hard Sheath. Convenient way to Hold your Knife Sheath. Neoprene construction with Slip-Resistant Backing. Adjustable velcro Straps for Mounting to Lower Leg.

Brand	XS Scuba #ad
Manufacturer	XsScuba #ad
Height	0.6 Inches
Length	9.1 Inches
Weight	0.3 Pounds
Width	8.6 Inches
Part Number	KP04

7. XS Scuba

#ad

XS Scuba EZ Quick Disconnect Adapter

#adXS Scuba #ad - Easily installs to Second Stage End of LP Regulator Hose. Convert standard regulator LP Hose to Low Pressure EZ QD Hose. Xs scuba ac900 "ez" qD Adapter. Xs scuba ac900 "ez" qD Adapter. Ez" attach bc and Dry Suit QD Hoses.

Brand	XS Scuba #ad
Manufacturer	XS Scuba #ad
Height	1.1 Inches
Length	4.8 Inches
Width	6.9 Inches
Part Number	AC900
Model	.

8. XS Scuba

#ad

XS Scuba Second Stage Quick Disconnect

#adXS Scuba #ad - Low pressure use only - below 200 psi. Add a quick-disconnect to most regulators or full face mask. Chromed brass construction. Lock-down screw to prevent accidental disconnection. Installs between low pressure regulator hose and second stage.

Brand	XS Scuba #ad
Manufacturer	XS Scuba #ad
Height	0.9 Inches
Length	2.1 Inches
Weight	0.3 Pounds
Width	2.7 Inches
Part Number	AC990
Model	SG_B007YWLCCM_US

9. XS Scuba

#ad

XS Scuba Quick Launch Marker Buoy Orange

#adXS Scuba #ad - 6 ft. 15 m of line. Combination oral and QD hose inflation. Spool line is attached to D-ring inside the pocket. 183 cm length / large 12” 305 cm circumference. Open bottom with anti-spill baffle. Lower pocket includes a spool with 50 ft.

Brand	XS Scuba #ad
Manufacturer	XS Scuba #ad
Height	5.4 Inches
Length	3.5 Inches
Weight	0.75 Pounds
Width	5.2 Inches
Part Number	AC085-OR

10. XS Scuba

#ad

XS Scuba Star Tool, Stainless Steel

#adXS Scuba #ad - Valve hand Wheel Driver. Remove and replace the most common scuba hoses. Compact size: width 3. 85" x 05" 9. 8 x 1. 3 cm Thick approximately. Hex wrenches: most common 5/32", 3/16" & 1/4". Wrenches: 1/2", 9/16", 5/8" & 11/16".

Brand	XS Scuba #ad
Manufacturer	XS Scuba #ad
Height	0.5 Inches
Length	3 Inches
Weight	0.2 Pounds
Width	2.1 Inches
Part Number	Tl127
Model	SG_B00H0IHXQY_US