Top 10 Trolling Motor Extension Handle – Trolling Boat Motors

As an Amazon Associate I earn from qualifying purchases.

1. Minn Kota

#ad

25, Inch, MinnKota MKA-43 Transom Mount Trolling Motor Telescopic Extension Handle 17, Inch

#ad
Minn Kota #ad - Experience total speed and steering control. Goes from 17" to 25". No tools required to install. Fits all outboard and trolling motors.
BrandMinn Kota #ad
ManufacturerJohnson Outdoors #ad
Height3 Inches
Length30.5 Inches
Weight0.39 Pounds
Width5 Inches
Part Number031702
Model1854107
WarrantyManufacturer Warranty

2. MotorGuide

#ad

MotorGuide MGA503A1 Universal Telescoping Tiller — Extension Handle for Hand-Operated Trolling Motors — 24-Inch — Black

#ad
MotorGuide #ad - Black finish. Maintains full throttle and steering functions. Extends reach for better control of the motor. Locks into place to fit transom-mount trolling motors and most popular tiller engines. Easy to install. Universal fit accommodates most tiller and trolling motor handles. The product measures 14 Inch. Extends controls for better speed selection. 24 inch adjustable extension.
BrandMotorGuide #ad
ManufacturerMotorGuide #ad
Height2.25 Inches
Length20.25 Inches
Weight0.69 Pounds
Width4.87 Inches
Part NumberMGA503A1
ModelMGA503A1

3. Newport Vessels

#ad

5-Feet, Newport Vessels Trolling Motor Battery Cable Extension Kit

#ad
Newport Vessels #ad - Comes with: 5ft red & black 8 Gauge cables | Connecting hardware | Electrical tape. Allows for the quick and easy lengthening of motor wires without impacting the performance of the trolling motor. 8 gauge cable ensures there is no performance loss through the extended Battery cable between the Battery and the trolling motor. Electrical tape is included for your safety. Cables are pure copper coated in tin for corrosion resistance Marine Grade.
BrandNewport Vessels #ad
ManufacturerTorero Imports LLC #ad
Height0.5 Inches
Length60 Inches
Weight0.95 Pounds
Width0.5 Inches
Part Number23P1000104
Model23P1000104

4. Ironwood Pacific

#ad

Ironwood Pacific HelmsMate Tiller Extension Handle T | 18" Fixed Length

#ad
Ironwood Pacific #ad - Anodized aluminum, corrosion resistant fittings and unbreakable nylon clamp are designed to last. T model; 18" fixed length. Fits gas and electric outboard boat trolling motors 15HP and under; designed for trolling speeds only. Full steering and throttle control while sitting away from the motor - improve comfort and balance in fishing, pontoon, and other boats. Made in usa with a lifetime warranty.
BrandIronwood Pacific #ad
ManufacturerIronwood Pacific Outdoors #ad
Height3 Inches
Length21 Inches
Weight0.32 Pounds
Width5 Inches
Part Number001.21
Model1135-43014

5. Pactrade Marine

#ad

40'', Pactrade Marine Boat Trolling Motor Telescopic Extension Handle Anodized Aluminum 24''

#ad
Pactrade Marine #ad - It locks into place to fit most transom-mount trolling motors and most popular tiller engines. Made In Taiwan. You can now experience total speed and steering control in any situation with this handle! Dimension: length: 24"-40", diameter: 2", and Diameter of the aluminum tube: 1-1/8".

This is an telescopic trolling motor extension handle that can be extended from 17" to 25". Item number: pm616140 Twist the handle to adjust to the desired length. The aluminum tube is made of anodized aluminum, and there is an anti-slipping PP grip at the end of the handle. This extension handle provides additional extension for convenient operation. It is lightweight and durable, and it is easy to be installed.
BrandPactrade Marine #ad
ManufacturerPactrade Marine #ad

6. Shurhold

#ad

Shurhold 833 6' Telescoping Extension Handle with 40"-72" Locking Length

#ad
Shurhold #ad - 6 feet telescoping extension handle 43 inch to 72 inch. High-strength, corrosion resistant, lightweight aluminum. Handles with standard yellow grips come in: 13 inch, 30 inch, 40 inch and 60 inch. Handles with blue finger grips come in: 30 inch and 60 inch. Shur-lok quick release system.
BrandShurhold #ad
ManufacturerShurhold #ad
Height1.26 Inches
Length42.99 Inches
Weight1.2 Pounds
Width1.26 Inches
Part Number833
Model833

7. Bullnose Products

#ad

Or Canoes, Bullnose Rudder Clamp On Rudder for 24-55 Thrust Trolling Motors: Pontoons, Kayaks

#ad
Bullnose Products #ad - Self deploy will not work because the system requires the shaft to slide up and down right where the rudder needs to be attached. Fit - the bullnose rudder is a clamp-on rudder that fits most 24 to 55 lb thrust transom electric trolling motors and a select few cable pull bow mounts. Bow mount - fits any shaft that measures 1 1/8" in diameter no matter the thrust including the minn kota, edge, and fortrex.

It measures, pontoons, jon boats, canoes, kayaks, 11" high x 5" wide and fits a 1 1/8" shaft diameter. By adding a bullnose rudder you will notice an instant response in turning, be able to track in a straight line and it enables you to drive the craft even while fishing. Quality - it is a newly manufactured product on the market to ensure you have a stress-free fishing experience. It is manufactured from impact plastic for durability and comes with stainless steel screws.

Simply add a bullnose rudder to the shaft of your trolling motor and notice significant improvement in steering when it comes to maneuvering your watercraft. However a hand cable pull will allow you to carefully bring the motor up out of the water and set it on the motor mount without any obstructions getting in the way. Essential - a "must" for taking control of your trolling motors steering ability and getting to your destination smoothly. It is most commonly used for "but not limited to" small boats, etc. The bow mount motor must be a hand cable pull, MAXXUM, NOT self deploy.
BrandBullnose Products #ad
ManufacturerBullnose Products LLC #ad
Height1.5 Inches
Length10.5 Inches
Weight0.54 Pounds
Width6.75 Inches
Part Number868527000206A

8. Pactrade Marine

#ad

Pactrade Marine Boat Trolling Motor Outboard Extension Handle Anodized Aluminum Fixed 30''

#ad
Pactrade Marine #ad - It is lightweight and durable, and it is easy to be installed. Item number: pM616030 Dimension: length: 18", diameter: 2", and diameter of the aluminum tube: 1-1/8". This extension handle provides additional extension for convenient operation. This is a non-extendable trolling motor extension handle that has a fixed length of 30".
BrandPactrade Marine #ad
ManufacturerPactrade Marine #ad
Height2.5 Inches
Length30 Inches
Width3 Inches
Part Number4347410784

9. attwood

#ad

One Size, Set of 2, Attwood 14367-6 Heavy-Duty Trolling Motor Quick Connectors 2-Wire 10-Gauge

#ad
attwood #ad - 22-inchs long; ideal for most trolling boats. Includes 2 connectors. Heavy-duty 10-gauge connector for dependable performance. Replaces battery clips; no chance of them slipping off in rough waters. Attwood products are both compatible and reliable, engineered and built with a never-fail attitude.
Brandattwood #ad
ManufacturerAttwood #ad
Height1 Inches
Length10 Inches
Weight4 Kilograms
Width4 Inches
Part Number14367-6
Model14367-6

10. G-FORCE Racing Gear

#ad

T-H Marine GFH-1GR-DP G-Force Trolling Motor Handle, Black

#ad
G-FORCE Racing Gear #ad - Lifts in the most difficult situations. Fits most models and makes Not recommended for MinnKota Edge or MotorGuide Pro models. Comes complete with a hook and loop strap to secure to the motor shaft while underway. Rugged, nylon jacketed stainless steel cable with a large comfortable cushioned grip handle. Trolling motor replacement release and lift system.
BrandG-FORCE Racing Gear #ad
ManufacturerT-H #ad
Height9.25 Inches
Length1.5 Inches
Weight0.01 Pounds
Width6.5 Inches
Part NumberGFH-1GR-DP
Model3002.1247