Top 10 34mm Scope Mount – Hunting Equipment

As an Amazon Associate I earn from qualifying purchases.

1. Arken Optics

#ad

Arken Optics Rigid Precision 20 MOA 34mm Scope Mount for Precision Shooting

#ad
Arken Optics #ad - 20 moa built in Elevation. Fits 1913 picatinny Rails and Weaver. Cnc machined from aircraft Billet Aluminum with Extremely High Precision. Rigid precision scope Mount combines highest precision to ensure ultimate accuracy and consistency. 2. 5 inch cantilever Forward Extension for Better Eye Relief.
BrandArken Optics #ad
ManufacturerArken Optics #ad

2. Vortex

#ad

Vortex Optics Pro Extended Viper 34mm Cantilever Mount , Black

#ad
Vortex #ad - Made with pride in the USA. Vortex pro 34mm cantilever ring mount provides the correct height and forward placement for proper scope mounting. The cantilever ring mount positions the center of the riflescope tube at a height of 1. 435” 36. 45mm from the base.
BrandVortex #ad
ManufacturerVortex Optics #ad
Height2.6 Inches
Length7.2 Inches
Weight0.46 Pounds
Width6.25 Inches
Part NumberCVP-34
ModelCVP-34
WarrantyUnlimited

3. Vortex

#ad

Vortex Optics Precision Extended Cantilever Mount, 34mm

#ad
Vortex #ad - The cantilever ring mount positions the center of the riflescope tube at a height of 1. 574” 40mm from the base. Use this cantilever mount for mounting 34mm tubes. These extended cantilevers are designed for mounting scopes with a forward location, providing correct eye relief and head placement.
BrandVortex #ad
ManufacturerVortex Optics #ad
Height1.57 Inches
Length4.72 Inches
Weight0.5 Pounds
Width1.57 Inches
Part NumberCM-534
ModelCM-534
WarrantyManufacture Warranty

4. UTG

#ad

50mm, 34mm High Profile, Black, UTG Leapers AIR42250 Inc Accu-Sync Offset Picatinny Rings

#ad
UTG #ad - Significant lightening cuts to massively reduce weight without compromising durability. Single mount utilizes locking Torx screws and square-shaped Integral recoil stops for a secure zero hold. Precision cnc machined from aircraft grade aluminum and finished in a matte black anodize. Precision cnc machined from aircraft grade aluminum with a matte black anodize, designed to fit on MIL-STD-1913 Picatinny rail platform.
BrandUTG #ad
ManufacturerLeapers, Inc. #ad
Height3 Inches
Length7 Inches
Weight0.35 Pounds
Width3 Inches
Part NumberAIR42250
ModelAIR42250

5. Warhuntusa

#ad

Warhuntusa Cantilever Offset Scope Mount 0 Moa 34mm for 20mm Picatinny Rail, Black

#ad
Warhuntusa #ad - Eye reliefthe cantilever ring mount provides the correct height and forward placement for proper scope mounting, allowing you to get the right eye relief. High quality materialqd mount frame crafted from lightweight 6061 grade aluminum with hardened steel Torx mounting hardware to prevent stripping of the bolts.

Unique design of scope mountslightweight one-piece scope mount for mounting most 34mm tube diameter Riflescopes - with weight comparable to a set of lightweight rings, while providing the added rigidity and convenience of a one piece mount. Quality assuranceall hardware and 34mm mounts ring necessary to install are included in the package. Fits 34mm scope tubesfor mounting 34mm diameter tube scopes to standard Picatinny rail equipped rifles. Convenient for swiching optics for different types of competitions.
BrandWarhuntusa #ad
ManufacturerWarhuntusa #ad

6. WARNE SCOPE MOUNTS MFG

#ad

WARNE SCOPE MOUNTS MFG QD XSKEL34DE QD XSKEL 34MM Dark Earth

#ad
WARNE SCOPE MOUNTS MFG #ad - Places optic at ideal heigHT for MSR and similar style platforms. Lightweight, Skeletonized aluminum body and caps. Extended design provides over 2 inches of forward cantilever for additional eye relief. 8 torn style fasteners with steel threaded inserts. Patent pending Dual Quick Detach levers.
BrandWARNE SCOPE MOUNTS MFG #ad
ManufacturerWARNE SCOPE MOUNTS MFG #ad
Part NumberQDXSKEL34DE
WarrantyOne Year Warranty

7. Warhuntusa

#ad

Black, Cantilever Dual Ring 20 Moa Mount Scope 34 mm Tube 2inch Offset

#ad
Warhuntusa #ad - High quality materialconstructed from 6061 aluminum, hard coat anodized. Convenient for swiching optics for different types of competitions. Unique design of scope mountslightweight one-piece scope mount, It's uniquely designed to provide up to 2.

5 inch, a forward offset mount to give proper eye relief specifically for AR platform rifles. Fits 34mm scope tubesfor mounting 34mm diameter tube scopes to standard Picatinny rail equipped rifles. With hardened steel Torx mounting hardware to prevent stripping of the bolts. You will get thema lightweight scope mount with nice hard plastic telescoping case, all hardware was included, including a torx key. 20 moa cantilever scope mount 20 MOA of elevation built in for long range shooting without exceeding your scope elevation adjustment.
BrandWarhuntusa #ad
ManufacturerWarhuntusa #ad
Part NumberSMV3420BK 20MOA

8. Primary Arms

#ad

0 MOA, Primary Arms GLx 34mm Cantilever Scope Mount

#ad
Primary Arms #ad - 100% designed and made in the U. S. A. Pushes optics over 2" forward for optimal eye relief. Lightweight and durable 6061-T6 aluminum construction. 1. 5 inch center-line height accommodates up to 56mm objectives. 0 moa cant ideal for close and mid-range applications.
BrandPrimary Arms #ad
ManufacturerPrimary Arms #ad

9. Wheeler

#ad

Shooting and Gunsmithing, Wheeler 2 Piece Picatinny Rail Scope Rings with Flat Top, 34mm Medium, 6-Hole Design and Integrated Anti-Cant Indicator for Leveling

#ad
Wheeler #ad - Includes: torx screws and Torx Wrench. Specs: features flat top rings for leveling and retained ½” lock nuts to secure to a Pic Rail. Durable: drastically increased clamping force can be applied due to the 6-hole ring design and the entire mount is constructed of 6061 aluminum. Convenient: features a flip-out, anti-cant indicator that can be mounted on the rear or forward ring. Dimensions: 34mm ring Diameter - Medium Ring Height.
BrandWheeler #ad
ManufacturerBattenfeld Technologies #ad
Height1.2 Inches
Length5.6 Inches
Weight0.13 Pounds
Width3 Inches
Part Number1099947
Model1099947
Warranty1 Year Warranty

10. Vortex Optics

#ad

Vortex Optics Precision Matched Rings 34mm, Height 1.10 inches

#ad
Vortex Optics #ad - These vortex precision matched rings position the center of the riflescope tube at a height of 1. 10 inches 27. 9 mm from the base. These vortex rings are serialized, vibratory tumbled, hand-bead blasted and finished off with a Type III hard coat anodize.

We start with certified usa 7075 t6 billet aluminum and hold it to an extremely tight tolerance of. 0005 using our precision Computer Numeric Controlled CNC mill. Sold two rings per package. Made in the USA. Hex wrench included. Will only work with Picatinny spec mounts—will not work with Weaver mounts. Our precision matched rings are kept in pairs throughout the manufacturing process — ensuring perfection from one set to another.
BrandVortex Optics #ad
ManufacturerVortex Optics #ad
Height2.5 Inches
Length6.9 Inches
Weight0.45 Pounds
Width4 Inches
Part NumberPMR-34-1.1
ModelPMR-34-1.1
WarrantyUnlimited